Alcohol Detectors

***HDAT-1000***

  *Professional Keychain
*Digital Alcohol Detector with Car Park Timer

  With advanced semi-conductor gas sensor technology, it can measures blood level from your breath.
The MCU control unit allows you to check your Blood alcohol Concentration Percentage (%BAC) accurately and easily.

1. Technical Specification :
1)Sensor : Fast recover semiconductor gas sensor
2)Size : 75(L) x 41(W) x 21(H) mm
3)Weight : 35 grams
4)Sensor warm up time : 30 sec.
5)Sensor burn-in time A : 300 sec.
6)Sensor burn-in time B : 120 sec.
7)Blow time : 4 sec.
8)Battery life : Over 300 tests
9)Battery : 2 x AAA alkaline batteries
10)Accuracy : < ¡¾3% at 0.12% BAC, under normal operating conditions and factors
11)Detection range : %BAC in 0.01 increments ranging from 0.00% to 0.12%
12)Alert : 0.05% BAC
13)Digital display : Three digits in numeric readout
14)Warranty : 6 months
15)Certificate : CE, FCC..

We are looking for dealer, distributor , importer  to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.

***HD-Safe Drive***
*Breath Test
*Gas Leak Test
*Lighting
*Key Ring
*Recalibration function by user
*5 signal (Green, Yellow, Orange, Red-bright, Red-dark)
*Size: 5.7cm X 3.4cm X 1.3cm
*Weight: 23.5g (Include Battery)
*CE, TUV, Q-Mark, KRISS 
*Power Source: 1.5V Battery (Size AAA, UM-4, RO 3)
*Electric Power: 151mA
We are looking for dealer, distributor , importer  to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.

 

***HD-Safe Mate***
*Breath Test
*LP gas detect
*Recalibration function by user
*Displays 20 stages of LCD for both g/l and %BAC
*Size: 8.95cm X 3.0 cm X 0.65 cm
*Weight: 43g (Include Battery)
*CE, FDA 
*Energy Source: 2 AA batteries.
*Battery Life: Can use more than 300 times.
*Sensor Type: MEMS.
*Material: ABS Resin (Acrylic Fiber) 
We are looking for dealer, distributor , importer  to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.
 

***HD-CA-2000***
*Sensor :Highly selective oxide-semiconductor sensor
*Size :120 x 60 x 25 mm
*Weight :200 grams
*Housing :Shock resistant, molded plastic
*Response time :3 sec.
*Warm up time :20 sec.
*Recovery time(sensor purge):30 sec.
*Battery life :Over 300 tests
*Battery :9V alkaline
*External power supply :12V DC adapter
*Accuracy :¡¾0.01% at 0.10% BAC
          Â¡Â¾0.05mg/liter at 0.50mg/liter BRAC
*Detection range :0.00 ~ 0.40% BAC
                 0.00 ~ 2.00 mg/liter BRAC
*Calibration :BAC simulator (Model 34C/Guth Laboratory, USA)
*Digital display :Three digits in numeric readout
*CE, FCC
We are looking for dealer, distributor , importer  to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.
 

***HD-AL-2500***
*Indication of B.A.C. : 0.00 to 0.40 %B.A.C. by LCD display
*Warm up time : < 2 MINUTES *. Normally less than 30 seconds
*Response time : within 2 seconds
*Maximum test times in 1 minute : 10 times
*Recycle time : < 20 seconds
*No need to use mouthpiece
*Sensor : Semiconductor type alcohol sensor
*Power supply :    Two 1.5V "AA" size alkaline battery
*Continuous using time without battery change : 4 hours
*Weights : 85g  
*Dimension (mm) : 104 (height) X 40 (width) X 20 (thickness)  
*Audible warnings : 3 steps beep warning of alcohol detection with  LCD display  
*Auto power off
*CE, FCC
We are looking for dealer, distributor , importer  to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.

***HD-CA-1000***

   1)Press the POWER Botton - Soon after a beep, The LED Lamps of the tester will be lighting one by one from
the green to red and then red to green for 20 seconds.
This is warm-up process prepares the sensor for testing.
- It is a "Warm-up" process to make the sensor and circuit be ready for testing.
  2)When you hear a beep and the green "Ready" LED lamp is on, place your lips on
the mouthpiece and blow steadily until it beeps (two beeps) again.
- The tester will automatically turn-off if you don't blow within 10 seconds.
  3)After you blow, the green LED lamp will flash for 3 seconds, and then the test result
will be shown with below corresponding lamp color for 7 seconds with beeps.
1. 0.01% 5 beeps with green LED lamp light-on
2. 0.01% 7 beeps with yellow1 LED lamp light-on
3. 0.03% 9 beeps with yellow2 LED lamp light-on
4. 0.05% 16 beeps with red1 LED lamp light-on
5. 0.08% 25 beeps with red2 LED lamp light-on

2. The "Alarm" level is adjustable pursuant to the local legal limit.
  4)Then, it will automatically turn-off.
  5)To retest, press POWER button again and repeat precedure.
- For accurate results, space tests at least 2 minutes apart.
*CE, FCC 
We are looking for dealer, distributor , importer  to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.