|
Magnetron sputtering coating line for low-emission act wall glass
Magnetron sputtering coating line for low-emission act wall glass
Adopting the principle of magnetron sputtering E-discharge, this Vacuum Coating Production Line can coat metallic film or compound films on the surface of large-sized glass, such as act wall glass or architectural glass, forming the glass with characteristics of sunshine shelter, temperature-keeping, energy-saving, low emission and decoration, etc. that has been extensively used high-rank architecture, act wall and room decoration, etc.
The production line is composed of glass-loading tipping rack, glass washing machine, attendant chamber, pre-pumping chamber, buffer chamber, sputtering coating chamber, output buffer chamber, output pre-pumping chamber, output washing machine, on-line inspection, un-loading tipping rack and control board system.
Work principle: This machine can produce reflective and lower irradiant architectural glass or act wall glass. By the principle of sputtering technique under magnetic field, some film is coated on the surface of large plate glass such as single metal film, alloyed film, metal compound film. The coated glass has function or effect of sunlight prevention, heating preservation, energy saving and decoration. By magnetron sputtering reactive coating technique, it can also coat or metallize various color films or iridescent film on glass.
By reactive coating technology and change of different target materials, the machine can make glass of any color such as silver, dark brown, sapphire, gilded, etc. It can also produce the imitation of ancient copper glass and of golden glass.
Its production capacity as below:
First, 3 or 6 magnetron sputtering power sources can be installed in the machine so as to meet the different technical requirements.
Second, multi-films coating can be achieved simultaneously and automatically by sputtering reactive coating or by evaporation coating. Just the glass goes through the machine from input to output and the whole work has been done.
Third, it is equipped with magnetron sputtering power source, gas mass flow gauge and speed control adjustable, guaranteeing the uniformity and consistence of coating quality.
Fourth, with iridescent coating system in it, it ensures the property of coating film with evenness, good adhesion, high hardness as well as fine corrosion resistance.
Example: JT-2500 Magnetron Sputtering Coater with movable targets for wall glass
Adopted international advanced technology with movable magnetron sputtering targets, the equipment can coat on heat reflecting architectural glass the single layer film or compound films with advantages of tight adhesion, corrosion resistance, evenness and mild color.
The equipment of new generation with multi-functions, superior in stable performance and easy manipulation with lower energy consumption, is an ideal machine for vacuum coating industry.
Its main technical data is as following:
1, Dimension of Chamber: 3300X2100X900mm
2, Ultimate Pressure: 3X10-3Pa
3, Pump Time: Less than 10 minutes
4, Size of Glass to be coated: 2500X1680mm 4 pcs
5, Sputtering Power: 30KW
6, Heating Power 27KW
7, Normal Total Power: 127KW
8, Target Moving Speed: 0.5~3m/minute (Adjustable)
9, Production capacity: 20 minutes/4 pcs, 100000~160000 square meters of glass per year
10, Floor Space: 10X5 square meters
Contact person: Alex Li
Tel: 86 758 2802710
Fax: 86 758 2855892
Mobile: (86) 13929890858
Email: vacuumsale@hotmail.com
MSN: vacuumsale@hotmail.com
Website: www.vacuummetallizer.com
|
|
|
|
[Contact Information] |
| Posted by |
Alex Li
|
| e-Mail | This information shows after Login. |
Firm
| Guangdong Zhonghuan Vacuum Equipment Co.Lt
| | Address | No.60 Changpai road | City & ZIP
| Zhaoqing, 526020
| Land
| China
| Telephone
| This information shows after Login.
|
| | Interest | design |
| | Product Specifications | in series or making as per requirement. |
| | Industry Category | vacuum coating or metallizing equipment |
| | Quality/Safety Certifications | ISO9001/2000 |
| | Delivery Lead Time | negotiable |
| | Payment & Price Terms | L/C or payment in advance |
| | My Offers | Offer to sell
Magnetron sputtering coating line for low-emission act wall glass
Adopting the principle of magnetron sputtering E-discharge, this Vacuum Coating Production Line can coat metallic film or compound films on the surface of large-sized glass, such as act wall glass or architectural glass, forming the glass with characteristics of sunshine shelter, temperature-keeping, energy-saving, low emission and decoration, etc. that has been extensively used high-rank architecture, act wall and room decoration, etc.
The production line is composed of glass-loading tipping rack, glass washing machine, attendant chamber, pre-pumping chamber, buffer chamber, sputtering coating chamber, output buffer chamber, output pre-pumping chamber, output washing machine, on-line inspection, un-loading tipping rack and control board system.
Work principle: This machine can produce reflective and lower irradiant architectural glass or act wall glass. By the principle of sputtering technique under magnetic field, some film is coated on the surface of large plate glass such as single metal film, alloyed film, metal compound film. The coated glass has function or effect of sunlight prevention, heating preservation, energy saving and decoration. By magnetron sputtering reactive coating technique, it can also coat or metallize various color films or iridescent film on glass.
By reactive coating technology and change of different target materials, the machine can make glass of any color such as silver, dark brown, sapphire, gilded, etc. It can also produce the imitation of ancient copper glass and of golden glass.
Its production capacity as below:
First, 3 or 6 magnetron sputtering power sources can be installed in the machine so as to meet the different technical requirements.
Second, multi-films coating can be achieved simultaneously and automatically by sputtering reactive coating or by evaporation coating. Just the glass goes through the machine from input to output and the whole work has been done.
Third, it is equipped with magnetron sputtering power source, gas mass flow gauge and speed control adjustable, guaranteeing the uniformity and consistence of coating quality.
Fourth, with iridescent coating system in it, it ensures the property of coating film with evenness, good adhesion, high hardness as well as fine corrosion resistance.
Example: JT-2500 Magnetron Sputtering Coater with movable targets for wall glass
Adopted international advanced technology with movable magnetron sputtering targets, the equipment can coat on heat reflecting architectural glass the single layer film or compound films with advantages of tight adhesion, corrosion resistance, evenness and mild color.
The equipment of new generation with multi-functions, superior in stable performance and easy manipulation with lower energy consumption, is an ideal machine for vacuum coating industry.
Its main technical data is as following:
1, Dimension of Chamber: 3300X2100X900mm
2, Ultimate Pressure: 3X10-3Pa
3, Pump Time: Less than 10 minutes
4, Size of Glass to be coated: 2500X1680mm 4 pcs
5, Sputtering Power: 30KW
6, Heating Power 27KW
7, Normal Total Power: 127KW
8, Target Moving Speed: 0.5~3m/minute (Adjustable)
9, Production capacity: 20 minutes/4 pcs, 100000~160000 square meters of glass per year
10, Floor Space: 10X5 square meters
Contact person: Alex Li
Tel: 86 758 2802710
Fax: 86 758 2855892
Mobile: (86) 13929890858
Email: vacuumsale@hotmail.com
MSN: vacuumsale@hotmail.com
Website: www.vacuummetallizer.com
|
| | Other Products | The main products listed as below:
1), Rotary vane vacuum pumps in series; 2), sliding valve vacuum pumps; 3), roots pumps; 4), liquid ring vacuum pumps; 5), oil diffusion pumps; 6), booster pumps; 7), optical coaters in series; 8), poly-arc ion coaters in series; 9), winding coaters in series; 10), evaporation/magnetron sputtering coaters in series; 11), vacuum desiccation equipments; 12), lacquering equipments, etc., that can be used & applied extensively in many fields such as electronics, optics, metallurgical industry, light industry, food industry, building industry, ceramics, plastics, etc.
|
| | Customers | We have customers from world wide. |
| | Company History | For nearly 40 years in history with rich experience in vacuum field, Guangdong Zhonghuan Vacuum Equipment Co. Ltd., has been specialized in design and manufacture of various vacuum pumps, vacuum coating machines and vacuum application equipments, taken as Hi-Tech enterprise in China.
The company plays the important role as the vice-secretary in China Vacuum Equipment Association, a remarkable member in China Vacuum learned society. The well-equipped research institute was established within the company and more than 100 items of vacuum products have been explored and produced. Some of the products won the national patents with crown as patent-technique in China.
Under the guideline of ISO9001 management system, the company, dependant on advanced technology, well-known brand ¡°Zhonghuan¡± and high quality, obtains many glorious titles such as ¡°Satisfactory Products¡±, ¡°Guangdong Outstanding Products¡±, ¡°State Silver Medal Owner¡± and ¡°Guangdong Brand of Celebrity¡±, etc., with its products well-sold at home and abroad, appreciated by the customers worldwide.
The main products listed as below:
1), Rotary vane vacuum pumps in series; 2), sliding valve vacuum pumps; 3), roots pumps; 4), liquid ring vacuum pumps; 5), oil diffusion pumps; 6), booster pumps; 7), optical coaters in series; 8), poly-arc ion coaters in series; 9), winding coaters in series; 10), evaporation/magnetron sputtering coaters in series; 11), vacuum desiccation equipments; 12), lacquering equipments, etc., that can be used & applied extensively in many fields such as electronics, optics, metallurgical industry, light industry, food industry, building industry, ceramics, plastics, etc.
|
| | Estimated Annual Sales | USD12000000 |
| | Company News | Under the guideline of ISO9001 management system, the company, dependant on advanced technology, well-known brand ¡°Zhonghuan¡± and high quality, obtains many glorious titles such as ¡°Satisfactory Products¡±, ¡°Guangdong Outstanding Products¡±, ¡°State Silver Medal Owner¡± and ¡°Guangdong Brand of Celebrity¡±, etc., with its products well-sold at home and abroad, appreciated by the customers worldwide. |
| | Remarks | Rotary vane vacuum pumps in series; 2), sliding valve vacuum pumps; 3), roots pumps; 4), liquid ring vacuum pumps; 5), oil diffusion pumps; 6), booster pumps; 7), optical coaters in series; 8), poly-arc ion coaters in series; 9), winding coaters in series; 10), evaporation/magnetron sputtering coaters in series; 11), vacuum desiccation equipments; 12), lacquering equipments, etc., that can be used & applied extensively in many fields such as electronics, optics, metallurgical industry, light industry, food industry, building industry, ceramics, plastics, etc. |
| | Web Site | This information shows after Login. |
|
|
|
|
| Product Details |
| Product id |
25987 |
| views |
223 |
| Added |
2007.03.03 |
|
|
 |
| |
|
|
Previous
