|
|
cv joint
 Previous Next 
|
cv joint
A Constant Velocity Joints or CV joints are attached to each end of a drive shaft
The CV joints are needed to transfer the torque at a constant speed to steered wheels as well as to accommodate up and down motions of the suspension.
You will find CV joints in all front-wheel drive cars. Many rear- and four-wheel drive cars and trucks have CV joints as well. The CV joint is packed with grease and protected by the rubber or plastic boot.
It does not require any maintenance and supposed to last very long provided that protective boot will not get damaged.
There are two most commonly used types of CV joints: ball-type and tripod-type. Different variations of ball-type CV joints are commonly used on the outer side of the drive shaft, while tripod-type CV joints mostly used on the inner side. Most common problem with the CV joints is when the protective boot gets damaged. Once this happens, the grease comes out and the moisture and dirt come in, eventually causing the CV joint to fail due to lack of lubrication and corrosion.
If a damaged boot caught early, simply replacing the CV joint boot and repacking the CV joint with fresh grease may fix the problem. If continue driving with broken boot, the CV joint or a whole drive shaft will need to be replaced. In worst case, the CV joint may disjoin causing the vehicle to stop running.
A clicking or popping noise when turning is the one of the indications of CV joint problems.
|
|
|
|
[Contact Information] |
| Posted by |
Leo.Yue
|
| e-Mail | This information shows after Login. |
Firm
| Guansheng Auto Parts Manufacture Co., Ltd
| | Address | No. 1 Gaoxiang RD, Ouhai Hi-tech Industria | City & ZIP
| Wenzhou &325000
| Land
| 86-577-86293262
| Telephone
| This information shows after Login.
|
| | Interest | 9 |
| | Product Specifications | A Constant Velocity Joints or CV joints are attached to each end of a drive shaft
The CV joints are needed to transfer the torque at a constant speed to steered wheels as well as to accommodate up and down motions of the suspension.
You will find CV joints in all front-wheel drive cars. Many rear- and four-wheel drive cars and trucks have CV joints as well. The CV joint is packed with grease and protected by the rubber or plastic boot.
It does not require any maintenance and supposed to last very long provided that protective boot will not get damaged.
There are two most commonly used types of CV joints: ball-type and tripod-type. Different variations of ball-type CV joints are commonly used on the outer side of the drive shaft, while tripod-type CV joints mostly used on the inner side. Most common problem with the CV joints is when the protective boot gets damaged. Once this happens, the grease comes out and the moisture and dirt come in, eventually causing the CV joint to fail due to lack of lubrication and corrosion.
If a damaged boot caught early, simply replacing the CV joint boot and repacking the CV joint with fresh grease may fix the problem. If continue driving with broken boot, the CV joint or a whole drive shaft will need to be replaced. In worst case, the CV joint may disjoin causing the vehicle to stop running.
A clicking or popping noise when turning is the one of the indications of CV joint problems.
|
| | Industry Category | autoparts |
| | Quality/Safety Certifications | |
| | Delivery Lead Time | immediate |
| | Payment & Price Terms | TT or LC & FOB |
| | My Offers | cv joints, cv alxes |
| | Other Products | |
| | Customers | worldwide |
| | Company History | since 1985 |
| | Estimated Annual Sales | |
| | Company News | Guansheng Auto Parts Manufacture Co., Ltd. (GSP) is a specialized Constant Velocity Joints and manufacturer, which was first established in 1985. As one of those pioneer private auto parts manufacturers in China, GSP has become a very competitive top player in the C. V. Joint & C. V. Axle aftermarket in China and all over the world after 20 years¡¯ development.
From the very beginning, GSP has been committed to providing quality products and excellent services to its customers. Our company has been certified by ISO9001, QS9000 and VDA6.1 international quality system. To enhance the product quality, we invested much in the introduction of advanced machines, such as Numerical Control Machine, Magnetic Inspection Equipment,Breaking Tester and Fatigue Tester. And also GSP¡¯s engineers keep improving the technique, craftwork, equipments and production procedures, so as to achieve lean production, provide precisely machined products according to customers¡¯ specific needs and endow our customers with sustainable competitive advantages.
At present, GSP has seven factories with the yearly production capacity of 5 million C. V. Joints and 1.2 million Drive Shafts. The C. V. Joint application is over 1,200 and the Drive Shaft application is over 600. The staff number is about 1,100, including over 100 engineers. With the support of strong technical forces, GSP has the capacity to develop over 50 new samples each month and our product quality criteria have come to the top among those C. V. Joint factories in China. |
| | Remarks | |
| | Web Site | This information shows after Login. |
|
|
|
|
| Product Details |
| Product id |
29060 |
| views |
403 |
| Added |
2007.07.31 |
|
|
|
| |
|
|
| |
|
|
|
|
|
|
Copyright © 2007 Trade-World.org, The International Trade Associations
| |
