|
|
| Category |
Title |
Grade |
# views |
Added |
Pic. |
| Gaskets & Seals |
 rubber seals
We "Qingdao Conet Technologies Co. Ltd" are a large rubber and plastic products manufacturer with 3 years experience in China, specializing in Extrusion, Co-extrusion, Molding products. We write to you in order to build long business relationships with your esteemded company.
The main products we supply are as followed,
1. Rubber extrusion profile, weatherstrip, edge trim, door seals, rubber fender;
2. PVC extrusion profile, door gasket, pvc seals, pvc fence, U-channel
3. Rubber modling products, O-ring, rubber grommets, rubber gasket
4. Car rubber fittings, rubber wiper, door seals, edge trim
Our products have qulified ISO 9001:2000 & RosH standard, if you are interested in any items, please feel free to contact us.
|
0 (#0) |
131 |
2007.10.30 |
 |
| Gaskets & Seals |
PTFE Packing
PTFE Packing
1.Structure
Braided from raw teflon tape,fiber(or called"split-yarn")or teflon with filled carbon micro-particle(or called "black teflon").Normally used at atatic sealing locations.
2.Performance and Features
1.Perfect corrosion resistance.
2."Black teflon"can be used at dynamic sealing location under middle pressure.
3.General sealing performance.
3.Scope of Application
1.Working temperature:~260¡æ
2.Working pressure:¡Ü6.4MPa
3.Applicable to the medium PH range:0-14
4.Product size:3x3mm-50mmx50mm
Fancy
Faith Sealing&packing Co.,Ltd
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
85 |
2007.09.29 |
 |
| Gaskets & Seals |
Comprofile gasket
Comprofile gasket
1.Structure
Corrugated gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The corrugated gasket with inner and outer rings or composite gasket attached with flexible graphite or teflon sheet are available depending on the working location and requirement.
2.Performance and Features
1.Applicable to high pressure and high temperature location.
2.Strong corrosion resistance.
3.Stable and reliable sealing function.
3.Scope of Application
1.Working temperature:~650¡æ
2.Working pressure:6.4-16.0MPa
3.Min.Pre-tightening specific pressure:y=70MPa
4.Gasket coefficient:m=4.25
5.Max.machinable size:~2800mm
Fancy
Faith Sealing&packing Co.,Ltd
TEL: 008657481317100
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
82 |
2007.09.29 |
|
| Gaskets & Seals |
Corrugated gasket
Corrugated gasket
1.Structure
Corrugated gasket is made of machined flat metallic plate with waved or corrugated surface in 90 degree angle.
The corrugated gasket with inner and outer rings or composite gasket attached with flexible graphite or teflon sheet are available depending on the working location and requirement.
2.Performance and Features
1.Applicable to high pressure and high temperature location.
2.Strong corrosion resistance.
3.Stable and reliable sealing function.
3.Scope of Application
1.Working temperature:~650¡æ
2.Working pressure:6.4-16.0MPa
3.Min.Pre-tightening specific pressure:y=70MPa
4.Gasket coefficient:m=4.25
5.Max.machinable size:~2800mm
Fancy
Faith Sealing&packing Co.,Ltd
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
81 |
2007.09.29 |
|
| Gaskets & Seals |
Double jacket graphite gasket
Double jacket graphite gasket
1.Structure
Metal clad gasket is a composite gasket with internal nonmetal material such as flexble graphite,teflon,asbestos-rubber sheet and ceramic fiber which is clad by special metal sheet in cold work.
2.Performance and Features
1. Normally used as flange sealing in large diameter pressure vessels such as heat exchanger and reactor.
2.Applicable to middle and low pressure condition.
3.Perfect gasket stability.
4.General sealing performance.
3.Scope of Application
1. Working temperature:~450¡æ
2.Working pressure:¡Ü6.4MPa
3.Gasket coefficient:m=3.75
4.Min.Pre-tightening specific pressure:y=60 MPa
5.Max.machinable size:~2800mm
Fancy
Cixi Faith Sealing&packing Co.,Ltd
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
64 |
2007.09.29 |
|
| Gaskets & Seals |
Lens gasket
Lens gasket
Lens gasket has a convex profile of Ring joint gasket. Temperature:800¡æ Pressure:32Mpa
Material:Soft Iron, carbon steel, F5,SS304,SS304L,SS316,SS316L.
Standard:JB90-95,JB2776-79£¬JB2777-79£¬DIN2697-97£¬DIS£¬JIS,ASME, API,ANSI
Fancy hu /Faith
Faith Sealing&packing Co.,Ltd
Mob :0086-574-81317100
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
105 |
2007.09.29 |
|
| Gaskets & Seals |
Ring joint gasket
Ring joint gasket
These Gaskets are manufactured in different solid metal types like soft iron/SS304/316/321 metal and other alloy items.
They are used to stand high pressure and temperatures and they are employed where corrosive agents are present.
These gaskets are obtained by mechanical working from forged or laminated metals.
They are employed in the production and refining process of oil and chemical industries.
These gaskets are designed in oval/octagonal shapes confirming to R,Bx and Rx series of API std 6A
Fancy
Faith Sealing&packing Co.,Ltd
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
78 |
2007.09.29 |
|
| Gaskets & Seals |
Spiral wound gasket
Spiral wound gasket
1. Structure
The wound style gasket consists of "V-shape"(or"W-shape")metal tape and nonmetal tape,which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
2.Performance and Features
1. Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
2.Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
3.Perfect sealing performance.
4.Normal requirement of flange surface finishing which contact with gasket.
5.Easy installation and low pre-tightening stress of gasket.
3.Kinds of Gasket
1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel tape,special order is a available through negotiation.
C.Nonmetal tape:flexible graphite,special made asbestos,teflon and non-asbestos paper.
4.Scope of Application
1. Working temperature:-196¡æ -700¡æ(not higher than 600¡æ in oxidic medium)
2.Working pressure:¡Ü25MPa
3.Gasket coefficient:m=2.5-4
4.Min.pre-tightening specific pressure:y-68MPa
5.Max.machinable size:-2800mm
Fancy /Faith
Faith Sealing&packing Co.,Ltd
E-mail: gasketseal@gmail.com
www.faithseal.com
|
0 (#0) |
89 |
2007.09.29 |
|
| Gaskets & Seals |
wholesale air force puma
Dear Sir or Madam:
WE CAN ACCEPT PAYPAL .
We have many brand name merchandises,such as,air jordan,air force,polo,lacoste, gucci,apple ipod,nano,mini,mp3,mp4 player, mobile phones,nokia,samsung,motorola,memory cards; all of our products are AAA+ name branded ,and good quality ,we are looking forward to do business with you and build a long time replationship in the future.
Best regards
Jeff
sales
website: www.wholesalesoldier.com
msn & email: wholesalesoldier@hotmail.com
|
0 (#0) |
59 |
2007.08.22 |
|
| Gaskets & Seals |
Reinforced Graphite Composite Gasket Sheet
gaskets |
0 (#0) |
63 |
2007.08.07 |
|
| Gaskets & Seals |
non-asbestos joint sheet
gaskets |
0 (#0) |
70 |
2007.08.07 |
|
| Gaskets & Seals |
asbestos joint sheet
gaskets |
0 (#0) |
65 |
2007.08.07 |
|
| Gaskets & Seals |
Non-metal flexible gasket
gaskets |
0 (#0) |
68 |
2007.08.07 |
|
| Gaskets & Seals |
Double Jacketed Gasket
gaskets |
0 (#0) |
62 |
2007.08.07 |
|
| Gaskets & Seals |
Ring joint gasket
gaskets |
0 (#0) |
69 |
2007.08.07 |
|
| Gaskets & Seals |
spiral-wound gasket
gaskets&seals |
0 (#0) |
82 |
2007.08.07 |
|
| Gaskets & Seals |
offer mechanical seals
1 Mechanical seals ,pump shaft seals ,cartridge seals,etc
2 O-rings, water seals, oil seals,etc.
3 TC Rings , SIC Rings ,Metal Weld bellows etc. |
0 (#0) |
109 |
2007.05.30 |
|
| Gaskets & Seals |
Mechanical Seal (HS252)
Mechanical Seals For All Kinds Of Pumps |
0 (#0) |
70 |
2007.05.26 |
|
| Gaskets & Seals |
Mechanical Seal,Seals,O-Rings
Now HengFen Seal MFG INC, has developed 80 series & 1000 sizes of mechanical seal, which can replace the similar products of John Crane &Burgmann. It also supplys various sealing materials such as: Silicon Carbide, Tungsten Carbide, Carbon, Ceramic, Teflon and Industrial Rubber(oil seals) ect. And our products exported to Europe, America, Southeast Asia. Now HengFen aslo makes OEM for some professional pump manufactures in the world. The eighty percent of our products are exported. |
0 (#0) |
74 |
2007.05.26 |
|
| Gaskets & Seals |
supply seals to you
Dear Ms
Have a nice day!My pleasure to introduce you our company and our products.Longshen seal manufacture Co.Ltd , is one of the biggest mechanical seal manufactures in china.
We sent this letter because of our thinking that your market is suitable for our products and we may have a good relationship together. Our products quality is up and the paice is acceptible.
We hope this letter will become a beginning of a good relationship and cooperation between us.
Look forward to hearing from you and establishing a mutually beneficial long-term business relationship.
Already now thank you very much for your kind interest
Kindest regards!
yours sincerely,
Jan
Phone:0086-27-83497172
Fax:0086-27-83497195
E-mail:zxj_seal@msn.com
|
0 (#0) |
102 |
2007.03.13 |
|
| Gaskets & Seals |
o-rings
o-rings |
0 (#0) |
196 |
2007.01.17 |
|
| Gaskets & Seals |
Supply Mechanical Seal Similar Of Burgmann Johncrane
Maximum quality and low price. |
0 (#0) |
137 |
2006.09.13 |
|
| Gaskets & Seals |
Supply Mechanical Seal For Pumps
Maximum quality and low price. |
0 (#0) |
126 |
2006.09.13 |
|
| Gaskets & Seals |
supply seal face
different |
0 (#0) |
135 |
2006.08.03 |
|
| Gaskets & Seals |
supply mechanical seals
different |
0 (#0) |
124 |
2006.08.03 |
|
| Gaskets & Seals |
supply pump parts
different |
0 (#0) |
133 |
2006.08.03 |
|
| Gaskets & Seals |
BGMD Series Pressure Bootster System
to be negotiated |
0 (#0) |
151 |
2006.05.21 |
|
| Gaskets & Seals |
BGMS Series Thermosiphon System
1645usd/set fob shanghai |
0 (#0) |
146 |
2006.05.21 |
|
| Gaskets & Seals |
BGM481 Series Mechanical Seal
to be negotiated |
0 (#0) |
134 |
2006.05.21 |
|
| Gaskets & Seals |
BGM461 Series Mechanical Seal
to be negotiated |
0 (#0) |
134 |
2006.05.21 |
|
 Prev 30 1 2 Next 30  | | Übersicht Seite 1 von 2 | | x100 Übersicht Seite: 1 |
|
|
|
Copyright © 2007 Trade-World.org, The International Trade Associations
| |
